BUSINESS OWNER & MANAGER CHARGED WITH MANSLAUGHTER

Earlier this year, in San Francisco there were two people charged with involuntary manslaughter in the death of an employee that was crushed while operating a forklift that he had not been formally trained or certified to operate. All powered industrial truck operators must be trained and certified in accordance with OSHA 1926.602 (d). Alfred Lee, owner of Good View Roofing and Building Supply Corp., and manager Alan Chan were charged with manslaughter in the death of employee Hua Quing Ruan. The accident occurred two years earlier in 2016 when the 60-year-old worker tipped over the forklift while attempting to load a bag of mortar mix while traveling down a loading dock ramp with a wooden pallet into a customer’s car. In transit the bag fell off the pallet and blocked the front wheel of the forklift. The worker then attempted to back away from the fallen mortar bag and backed off the side of the ramp and tipped the lift over. Surveillance video shows the employee trying to jump out of the way of the falling lift, however he was not able to get clear and was hit and crushed by the lift.

BUSINESS OWNER

According to the Cal/OSHA investigators the employee was not wearing his seat belt and it played a significant factor in his death. In addition, the employee had no formal forklift training and was not certified to operate the lift. “When employers take workplace safety shortcuts, it’s employees that suffer,” District Attorney George Gascón said in a statement.

OSHA says, 70 percent of workplace accidents can be avoided with proper training and safety procedures. NIOSH states that the three most common types of injuries occur when: A forklift overturns; workers are struck, crushed, or pinned by a forklift; and workers fall from a forklift.

Tips on how to avoid accidents and near misses when operating a forklift:

Gehl Lift

  •   • Give your forklift a thorough inspection prior to use
    • Only operate a forklift if you are authorized to do so
    • Always use your seatbelt
    • Become familiar with the features and functions of each forklift you operate
  •    • Only pick up a load when you are sure it is stable
    • Know and do not exceed the rated load capacity of your forklift
    • Understand and know how to use your load capacity chart

NOT KNOWING THIS …

graph

CAN LEAD TO THIS!

Tipped Over Lift

Requirements for Retraining and                                                         
Refresher training is required when:                                                            

risky operating

• There has been an unsafe operation
• An accident or near miss
• An evaluation indicates that the operator is not capable of performing the assigned duties
• A new type of truck has been introduced into the workplace
• There has been three years since operators last evaluation

It is unfortunate events like this one that illustration the importance of getting your people the training they need to do the job as informed, safe workers. It has been said that the OSHA standards have been written in the blood of those that have come before us, before a standard was developed. Always be sure that workers who use heavy equipment have the experience and training needed to operate their machine safely. Lets protect our workers and the neighboring trades onsite from needless incidents and accidents that are preventable by receiving proper training!

NEED YOUR PEOPLE CERTIFIED?

Contact us today at 1 800-819-6092
www.triventsc.com                                                                                                             header logo

Are Your Riggers Qualified?

Riggers

Quick question for you, do you know what the total sling capacity of two ½” EIPS / IWRC wire rope slings choked at 45 degrees is good for? More importantly does the person you have rigging for you know the answer? The answer may surprise or potentially scare you. If the answer is no, then this is where you want to contact Trivent Safety Consulting and get signed up for the next qualified rigger and signal person training course. Subpart CC requires qualified rigger & signal persons while rigging and signaling construction loads. Our trainers at Trivent Safety Consulting have over 20 years of field experience when it comes to rigging and signaling cranes. We have developed a training course that can get your workers up to speed on how to properly rig materials and  flag / signal a crane properly!

signal a crane

Scott Seppers erecting steel
Bryan McClure & Scott Seppers erecting steel in 1998

Here is how you determine the answer to the original question:

½” EIPS IWRC wire rope sling in a choked configuration has a rated capacity of 3800lbs. At 45 degrees we have a listed sling multiplier of 1.41
3800 X 1.41 = 5358 combined rated lifting capacity.
Would you like to learn more? Follow our link to our next upcoming qualified rigger and signal person class!

Contact us today 1 800-819-6092 or reach us on the web at www.triventsc.com